> Products   > Product List   

10 - 

Synthetic roof and waterproofing membranes, tapes


J 870 010 - KÖSTER Special Joint Tape

Cold applied self-adhesive joint tape for the integration into area waterproofing made of bitumen thick film sealants and KÖSTER KSK waterproofing membranes. Fields of application include waterproofing and permanent bridging of dilatation-, extension- and building separation-joints.

KÖSTER Special Joint Tape has a highly tear resistant mesh, resists the highest stresses and is immediately waterproof against pressurized water. The membrane is laminated with a 5 cm wide strip of aluminium foil centered on the side of the membrane which faces away from the building.


R 817 105 AS - KÖSTER KSK ALU Strong

Cold applied self-adhesive synthetic / bitumen sealing membrane for the waterproofing of small, weather exposed roofs, garages and car ports. Applicable between + 12 °C and + 35 °C.

KÖSTER KSK ALU Strong does not require hot air or propane gas welding for its application. It is laminated with a coarse grain embossed, UV resistant aluminum foil which is coated with a grey protective finish on the top side. For additional reinforcement a highly tear resistant fabric is embedded. Placement of a gravel layer on top of the membrane after installation is not required.


RE 820 - KÖSTER ECB 2.0 F

KÖSTER ECB Membranes are made of a mixture of Ethylene Copolymer and a special bitumen. A glass fiber mesh is embedded in the middle of the membrane to provide an especially high dimensional stability and resistance against shrinkage. KÖSTER ECB Membranes are watertight, chemically resistant, and resistant to stress cracking. KÖSTER ECB Membranes are UV-stable, resistant to aging, and microorganisms and can be applied directly to bituminous roofs.

KÖSTER ECB F Membranes feature an additional polyester fleece backing for a full surface adhesion installation.


RE 820 - KÖSTER ECB 2.0

KÖSTER ECB Membranes are made of a mixture of Ethylene Copolymer and a special bitumen. A glass fiber mesh is embedded in the middle of the membrane to provide an especially high dimensional stability and resistance against shrinkage. KÖSTER ECB Membranes are watertight, chemically resistant, and resistant to stress cracking. KÖSTER ECB Membranes are UV-stable, resistant to aging, and microorganisms and can be applied directly to bituminous roofs.


RE 820 U - KÖSTER ECB 2.0 U

KÖSTER ECB Membranes are made of a mixture of Ethylene Copolymer and a special bitumen. KÖSTER ECB Membranes are watertight, chemically resistant, and resistant to stress cracking. KÖSTER ECB Membranes are UV-stable, resistant to aging, and microorganisms and can be applied directly to bituminous roofs.

KÖSTER ECB U are unreinforced homogeneous ECB Membranes for the creation of drainage and ventilation flanges and corner reinforcements.

 


RT 101 - KÖSTER PUR Membrane Adhesive


RT 102 - KÖSTER Contact Adhesive

KÖSTER Contact Adhesive is a ready to use, one-component contact adhesive for details and connections with non-fleece backed KÖSTER ECB and KÖSTER TPO Membranes to non-TPO substrates.


RT 816 - KÖSTER TPO 1.6

KÖSTER TPO Membranes are made of flexible polyolefin. A glass fiber mesh is embedded in the middle of the membrane to provide an especially high dimensional stability and resistance against perforation. It offers a high reliability and is characterized by a fast and economical installation. KÖSTER TPO Membranes are UV-stable, resistant to aging, microorganisms, and can be applied directly onto old bitumen membranes.


RT 816 F - KÖSTER TPO 1.6 F

KÖSTER TPO Membranes are made of flexible polyolefin. A glass fiber mesh is embedded in the middle of the membrane to provide an especially high dimensional stability and resistance against perforation. It offers a high reliability and is characterized by a fast and economical installation. KÖSTER TPO Membranes are UV-stable, resistant to aging, microorganisms, and can be applied directly onto old bitumen membranes.

KÖSTER TPO F Membranes feature an additional polyester fleece backing for a full surface adhesion installation.


RT 816 F 2S - KÖSTER TPO 1.6 F 2S

KÖSTER TPO Membranes are made of flexible polyolefin. A glass fiber mesh is embedded in the middle of the membrane to provide an especially high dimensional stability and resistance against perforation. It offers a high reliability and is characterized by a fast and economical installation. KÖSTER TPO Membranes are UV-stable, resistant to aging, microorganisms, and can be applied directly onto old bitumen membranes.

KÖSTER TPO F2S Membranes feature an additional polyester fleece backing for a full surface adhesion installation and provide welding edges on two sides.


RT 818 - KÖSTER TPO 1.8

KÖSTER TPO Membranes are made of flexible polyolefin. A glass fiber mesh is embedded in the middle of the membrane to provide an especially high dimensional stability and resistance against perforation. It offers a high reliability and is characterized by a fast and economical installation. KÖSTER TPO Membranes are UV-stable, resistant to aging, microorganisms, and can be applied directly onto old bitumen membranes.


RT 818 F - KÖSTER TPO 1.8 F

KÖSTER TPO Membranes are made of flexible polyolefin. A glass fiber mesh is embedded in the middle of the membrane to provide an especially high dimensional stability and resistance against perforation. It offers a high reliability and is characterized by a fast and economical installation. KÖSTER TPO Membranes are UV-stable, resistant to aging, microorganisms, and can be applied directly onto old bitumen membranes.

KÖSTER TPO F Membranes feature an additional polyester fleece backing for a full surface adhesion installation.


RT 818 F 2S - KÖSTER TPO 1.8 F 2S

KÖSTER TPO Membranes are made of flexible polyolefin. A glass fiber mesh is embedded in the middle of the membrane to provide an especially high dimensional stability and resistance against perforation. It offers a high reliability and is characterized by a fast and economical installation. KÖSTER TPO Membranes are UV-stable, resistant to aging, microorganisms, and can be applied directly onto old bitumen membranes.

KÖSTER TPO F2S Membranes feature an additional polyester fleece backing for a full surface adhesion installation and provide welding edges on two sides.


RT 820 - KÖSTER TPO 2.0

KÖSTER TPO Membranes are made of flexible polyolefin. A glass fiber mesh is embedded in the middle of the membrane to provide an especially high dimensional stability and resistance against perforation. It offers a high reliability and is characterized by a fast and economical installation. KÖSTER TPO Membranes are UV-stable, resistant to aging, microorganisms, and can be applied directly onto old bitumen membranes.


RT 820 F - KÖSTER TPO 2.0 F

KÖSTER TPO Membranes are made of flexible polyolefin. A glass fiber mesh is embedded in the middle of the membrane to provide an especially high dimensional stability and resistance against perforation. It offers a high reliability and is characterized by a fast and economical installation. KÖSTER TPO Membranes are UV-stable, resistant to aging, microorganisms, and can be applied directly onto old bitumen membranes.

KÖSTER TPO F Membranes feature an additional polyester fleece backing for a full surface adhesion installation.


RT 820 F 2S - KÖSTER TPO 2.0 F 2S

KÖSTER TPO Membranes are made of flexible polyolefin. A glass fiber mesh is embedded in the middle of the membrane to provide an especially high dimensional stability and resistance against perforation. It offers a high reliability and is characterized by a fast and economical installation. KÖSTER TPO Membranes are UV-stable, resistant to aging, microorganisms, and can be applied directly onto old bitumen membranes.

KÖSTER TPO F2S Membranes feature an additional polyester fleece backing for a full surface adhesion installation and provide welding edges on two sides.


RT 820 U - KÖSTER TPO 2.0 U

KÖSTER TPO Membranes are made of flexible polyolefin. It offers a high reliability and is characterized by a fast and economical installation. KÖSTER TPO Membranes are UV-stable, resistant to aging, microorganisms, and can be applied directly onto old bitumen membranes.

KÖSTER TPO U are unreinforced homogeneous TPO Membranes for the creation of drainage and ventilation flanges and corner reinforcements.


RT 901 - KÖSTER External Corner black 90 degrees

For the professional creation of external corners, 90°, length of edge 100 mm


RT 901 - KÖSTER External Corner light grey 90 degrees

For the professional creation of external corners, 90°, length of edge 100 mm


RT 902 - KÖSTER Internal Corner black 90 degrees

For the professional creation of external corners, 90°, length of edge 100 mm


RT 902 - KÖSTER Internal Corner light grey 90 degrees

For the professional creation of external corners, 90°, length of edge 100 mm


RT 910 - KÖSTER TPO Metal Composite Sheet black

One-sided polymer coated metal sheet used to fabricate metal drip edges and other roofing edge profiles. 1.00 x 2.00 m light grey or black


RT 910 - KÖSTER TPO Metal Composite Sheet light grey

One-sided polymer coated metal sheet used to fabricate metal drip edges and other roofing edge profiles. 1.00 x 2.00 m light grey or black


W 810 - KÖSTER Fix-Tape 10 SY

KÖSTER Fix-Tape 10 SY is a rubber / bitumen based 1.0 mm thick self-adhesive sealing tape, laminated twice with a highly tear resistant polyethylene foil.


W 810 AL - KÖSTER Fix-Tape 10 ALU

Self-adhesive sealing tape for the waterproofing of areas such as wall / floor junctions, wall and roof penetrations or for the repair of leaking gutters and downspouts.

KÖSTER Fix-Tape 10 ALU is 1 mm thick, rubber / bitumen based with an aluminium foil laminated on the top-side.


W 815 015 F - KÖSTER Butyl Fix-Tape Fleece

Cold applied self-adhesive tape for sealing the upper edges of KÖSTER KSK sealing membranes. KÖSTER Butyl Fix-Tape Fleece can be plastered over.

KÖSTER Butyl Fix-Tape Fleece 1.5 mm thick with a separating backing paper on the bottom side. The material is highly tear resistant, immediately waterproof and can be plastered over due to its fleece-laminated upper side. Priming before application of the KÖSTER Butyl Fix-Tape Fleece is not necessary.


W 815 020 DS - KÖSTER Fix-Tape 15 DS

Double sided cold applied self-adhesive synthetic / bitumen sealing membrane for the creation of custom detail waterproofing solution.

The KÖSTER KSK DS 15 membrane does not require hot air or propane gas welding for its application. Due to its great flexibility it allows simple application even to difficult details.


W 815 096 AL - KÖSTER KSK ALU 15

Cold applied self-adhesive rubber / bitumen sealing membrane for the waterproofing of small, weather exposed areas such as roofs, garages or balconies. Applicable between + 12 °C and + 35 °C.

KÖSTER KSK ALU 15 is laminated with a reinforced aluminium foil on the top side. It does not require hot air or propane gas welding for its application, is vapor tight, waterproof, weather and UV resistant.


W 815 105 - KÖSTER KSK SY 15

Cold applied self-adhesive rubber / bitumen waterproofing membrane according to DIN 18 195. Suitable for application from + 5 °C to + 30 °C. Fields of application include basements, foundation plates, balconies, terraces or on polystyrene elements.

KÖSTER KSK SY 15 membranes do not require hot air or propane gas welding for application. It is highly flexible, immediately waterproof, crack bridging and resistant to driving rain. Suitable for application even on cold substrates. Radonproof. With a double laminated, highly tear-resistant polyethylene foil on top.


W 815 105 DS - KÖSTER KSK DS 15

Double sided cold applied self-adhesive synthetic / bitumen sealing membrane for the creation of custom detail waterproofing solution.

The KÖSTER KSK DS 15 membrane does not require hot air or propane gas welding for its application. Due to its great flexibility it allows simple application even to difficult details.